Linked Counter Builder
Define how advancing one counter affects others.
Live Linked Counter Builder
Instant browser calculations & session state saved locally.
Key Capabilities
- ✓Custom trigger logic (e.g., every 30 stitches, advance row +1 and reset stitches)
- ✓Automated repeat advancement based on row cycle completions
- ✓Visual linked dependency flowchart
- ✓Fail-safe manual override for unexpected increases
Expert Crafting Advice
- 💡Link stitch counts to row advances for simple rectangular scarves and blankets.
- 💡Temporarily unlink counters when working odd edge stitches or shaping turns.
How the Linked Counter Builder Works
The Linked Counter Builder works in 4 steps.
- 1
Write the link rule
Enter the rule in the notes box, for example "24 sts = 1 row; 4 rows = 1 repeat".
- 2
Set the inner target
Type the stitches per row, such as 24, into Target Goal.
- 3
Count only stitches
Press Space or tap + Count after each stitch. Keep counting past the target; the running total carries the row information.
- 4
Read linked values
Divide the running total by the rule to get the row and the stitch inside the row. The total and your rule save in the browser.
Linked Counter Builder Formula
The Linked Counter Builder formula converts one running stitch total into a row number and a stitch position.
Completed rows = ⌊Total stitches ÷ Stitches per row⌋
Current stitch = Total stitches mod Stitches per row
Current repeat = ⌊Completed rows ÷ Rows per repeat⌋ + 1
- Total stitches
- The running number on the counter
- Stitches per row
- The inner link value
- Rows per repeat
- The outer link value
- ⌊ ⌋
- Round down
Worked example: With 24 stitches per row and 4 rows per repeat, a total of 203 stitches gives ⌊203 ÷ 24⌋ = 8 completed rows, a current stitch of 203 mod 24 = 11, and repeat ⌊8 ÷ 4⌋ + 1 = 3.
Linked Counter Builder Conversion Table
The Linked Counter Builder conversion table converts running stitch totals into rows and stitch positions for a 24-stitch row and a 4-row repeat.
| Total stitches | Completed rows | Stitch in current row | Current repeat |
|---|---|---|---|
| 24 | 1 | 0 | 1 |
| 50 | 2 | 2 | 1 |
| 96 | 4 | 0 | 2 |
| 100 | 4 | 4 | 2 |
| 150 | 6 | 6 | 2 |
| 203 | 8 | 11 | 3 |
| 240 | 10 | 0 | 3 |
| 300 | 12 | 12 | 4 |
| 384 | 16 | 0 | 5 |
A stitch position of 0 means the row just finished and the next stitch starts a new row.
What is a Linked Counter Builder?
A linked counter builder is a tool that sets rules so advancing one counter changes another, such as starting a new row when the stitch count reaches its target. The Crochet Stitch Counter Linked Counter Builder treats stitches, rows and repeats as connected numbers instead of separate tallies.
Crochet counts nest inside each other. Stitches fill a row, rows fill a repeat, and repeats fill a section. A link rule such as "every 24 stitches = 1 row" turns one running stitch total into a row number and a stitch position.
Linked counting means you tap one button and read 2 or 3 numbers. The rule does the conversion, so no count drifts out of step with another.
What are the Uses of a Linked Counter Builder?
There are 4 main uses of a Linked Counter Builder.
Counting with one button
Only stitches get tapped; rows and repeats follow from the rule.
Following nested instructions
Rows inside repeats inside sections stay connected.
Reducing count drift
Linked numbers cannot disagree with each other.
Restarting after mistakes
Subtracting stitches from the total moves the row and repeat values back together.